Overview
TILAC is a single component solvent-borne Alkyd paint with good durability properties. TILAC is used as a finishing coat over primed wood and metal surfaces both internal and external.
Features
- Economical and easy to use
-Corrosion protection especially with a primer
- Tough and durable film
- Excellent adhesion on general substrates
- Good flow and smooth finish
- Shorter drying times as compared to normal enamel
Coating system
| Ferrous Metal; Non-Ferrous Metal; Wood and Timber | ||
| Type | Products | No. of coats |
| Sealer | - Ferrous Metal: Tilac Red Oxide Primer/ Tilac Grey Primer/ Nippon 1100 Fast Drying Primer - Non-Ferrous Metal: Nippon Vinilex 120 Active Primer - Wood and Timber: Tilac Aluminium Wood Primer. |
1 coat |
| Finishing | Nippon Paint Tilac | 1-2 coats |
Application data
 Application Methods |
Brush, roller, compressed and air spray |
 Dilution |
Use clean water Roller & brush: 20% maximum Airless Spray: 10% maximum |
 Drying Time |
Dry to touch: Approximately 45 minutes Dry to handle: 16 hours |
 Overcoating Time |
24 hours. Minimum |
 Recommended Film Thickness |
30 microns for dry film |
 Finish |
Full Gloss |
 Packing |
0.8 Liter, 3 Liters & 20 Liters |
