Overview
BILAC is a single component solvent-borne Oil-Modified Alkyd paint with good durability, higher gloss and better opacity properties. BILAC is used as a finishing coat over primed wood and metal surfaces both internal and external.
Features:
- Easy to use
- Better coverage
- Corrosion protection especially with a primer
- Tough and durable film
- Excellent adhesion on general substrates
- Good flow & smooth finish
- Shorter drying times as compared to normal enamel
- Higher Gloss
Nippon Paint’s colour chips
NOTE: Photographs and paint swatch colours will vary depending on your screen settings and resolution. If you would like to find out more about a colour, we recommend that you contact our nearest dealer.
Coating system
| Ferrous Metal; Non-Ferrous Metal; Wood and Timber | ||
| Type | Products | No. of coats |
| Sealer / Primer | - Ferrous Metal: Nippon Bilac Metal Red Oxide Primer/ Nippon 1100 Fast Drying Primer - Non-Ferrous Metal: Nippon Vinilex 120 Active Primer - Wood and Timber: Nippon Bilac Aluminium Wood Primer |
1 coats |
| Undermediate | Bilac Undercoat White | 1 coats |
| Finishing | Bilac | 1-2 coats |
Application data
 Application Methods |
Brush, roller, compressed and air spray |
 Dilution |
Thinner: Nippon Paint Bilac Thinner Roller & Brush: 10% maximum Air Spray: 20% maximum |
 Drying Time |
Dry to touch: Approximately 45 minutes Dry to handle: 16 hours |
 Overcoating Time |
24 hours. Minimum |
 Recommended Film Thickness |
30 microns for dry film 70 microns for wet film |
 Finish |
Full range of decorative colours as per colour card Full Gloss |
 Packing |
0.8 Liter & 3 Liters |
