Overview
TILAC FD is a single component solvent-borne Oil-Modified Alkyd paint with fast drying, good durability, higher gloss and better opacity properties. TILAC FD is used as a finishing coat over primed wood and metal surfaces both internal and external.
Performance Characteristics:
- Fast drying
- Economical and easy to use
- Corrosion protection especially with a primer
- Tough and durable film
- Excellent adhesion on general substrates
- Good flow and smooth finish
Coating system
| Ferrous Metal; Non-Ferrous Metal; Wood and Timber | ||
| Type | Products | No. of coats |
| Sealer | Ferrous Metal - Prime with Nippon TILAC RED OXIDE PRIMER, TILAC GREY PRIMER or NIPPON 1100 FAST DRYING PRIMER for better result. Non-Ferrous Metal - Prime with NIPPON VINILEX 120 ACTIVE PRIMER Wood and Timber - Prime with TILAC ALUMINIUM WOOD PRIMER |
1 coat |
| Finishing | Nippon Tilac FD | 1-2 coats |
Application data
 Application Methods |
Brush, roller, compressed and air spray |
 Dilution |
Use clean water Thinner: NIPPON TILAC THINNER |
 Drying Time |
Dry to touch : Approximately 45 minutes Dry to handle : 4 hours |
 Overcoating Time |
Minimum 6 hours |
 Recommended Film Thickness |
30 microns for dry film 61 microns for wet film |
 Finish |
Finish Full range of decorative colours as per colour card Finish : Full Gloss |
 Packing |
0.8 Liter, 3 Liters, 18 Liters & 20 Liters |
